[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Abdel-Khalik, A.
Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives [Program→]
Abdelrahem, M.
Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives [Program→]
Abdulgalil, M.
Reliability Assessment of Microgrids with Multiple Distributed Generations and Hybrid Energy Storage [Program→]
Abeywardana, D.
An Interleaved Boost Inverter Based Battery-Supercapacitor Hybrid Energy Storage System with a Reduced Number of Current Sensors [Program→]
Abu-Mahfouz, A.
Cryptography Methods for Software-Defined Wireless Sensor Networks [Program→]
Topology Discovery Protocol for Software Defined Wireless Sensor Network: Solutions and Open Issues [Program→]
Efficient Two Stage Spectrum Sensing Combination for Cognitive Radio [Program→]
Abu-Rub, H.
A Simple Control Technique for Distributed Generations in Grid-Connected and Islanded Modes [Program→]
Abu-Rub, H.
Open-Circuit Fault Diagnosis and Fault-Tolerant Model Predictive Control of SubMultilevel Inverter [Program→]
Abu-Rub, H.
Low Complexity Model Predictive Control of PUC5 based Dynamic Voltage Restorer [Program→]
Abu-Siada, A.
Enhancing the Estimation of the Overall Produced Power by Several Adjacent Photovoltaic Systems Using Existing Correlational Factors [Program→]
Acero, J.
An Application of Learner-Centered Teaching of Advanced Electromagnetics for Electronic Engineering Master Students [Program→]
Acuna, P.
Model Predictive Control of a Multi-String LCL-Type Grid-Connected H-NPC PV Converter [Program→]
Series-Cascaded AC Microgrid Topology Integrating Non-dispatchable Distributed Generation and Storage [Program→]
Agarwal, V.
A Low Computational Cost Model Predictive Controller for Grid Connected Three Phase Four Wire Multilevel Inverter [Program→]
Agbossou, K.
Case Study of Data Management for Power and Energy Monitoring [Program→]
Fuzzy Logic Based Reactive Power Management for Autonomous MicroGrid [Program→]
Agrawal, P.
Introducing Network Multi-tenancy for Cloud-based Enterprise Resource Planning: An IoT Application [Program→]
Aguilera, R.
Model Predictive Control of a Multi-String LCL-Type Grid-Connected H-NPC PV Converter [Program→]
Phase-Shifted Model Predictive Control of a Three-Level Active-NPC Converter [Program→]
Ahn, H.
Functional Safety Improvement of Electric Power Steering System by using Electronic Stability Control System [Program→]
Akiyama, T.
Design of a Two-Inertia Control System using a Fictitious Exogenous Signal [Program→]
Akram, U.
A Novel Operation Strategy of Battery-Supercapacitor Hybrid Energy Storage System Providing Frequency Regulation Service [Program→]
Akter, M.
Charging Control of Vanadium Redox Battery Based Energy Storage Systems with Variable Input Power [Program→]
Al-Haddad, K.
Low Complexity Model Predictive Control of PUC5 based Dynamic Voltage Restorer [Program→]
Al-Hilfi, H.
Enhancing the Estimation of the Overall Produced Power by Several Adjacent Photovoltaic Systems Using Existing Correlational Factors [Program→]
Alahakoon, S.
MPC and Energy Storage Based Frequency Regulation Strategy for Hybrid Electric Ships [Program→]
Alharbi, H.
Reliability Assessment of Microgrids with Multiple Distributed Generations and Hybrid Energy Storage [Program→]
Ali, S.
An LPV H∞ Control Design for the Varying Rotor Resistance Effects on the Dynamic Performance of Induction Motors [Program→]
Almuhaini, M.
Reliability Assessment of Microgrids with Multiple Distributed Generations and Hybrid Energy Storage [Program→]
Alves, N.
Application of the two-stage one-dimensional cutting stock problem in the steel industry [Program→]
Ambagahawaththa, T.
Ultra-high Step-up DC-DC Converter Family Based on Feed-forward Capacitor and Coupled Inductor [Program→]
An, J.
A novel stability criterion for a class of networked control systems using some integral inequalities [Program→]
Angulo, A.
Predictive Control Strategy for an Induction Machine fed by a 3L-NPC Converter with Fixed Switching Frequency and Improved Tracking Error [Program→]
Armando, E.
A New Laboratory for Hands-on Teaching of Electrical Engineering [Program→]
Arshad, M.
Advanced Direct Torque Control of Four Switch Fed Two-Phase Symmetric Induction Motor [Program→]
Astorga, J.
Model Predictive Control of a Multi-String LCL-Type Grid-Connected H-NPC PV Converter [Program→]
Awadallah, M.
Hardware-In-The-Loop Simulation For The Design And Testing Of Motor In Advanced Powertrain Applications [Program→]
Azevedo, G.
Structures of Repetitive Controllers Based on GDSC with Feedforward Action [Program→]
Aziz, A.
Exploring the Application of Artificial Neural Network in Rural Streamflow Prediction - A Feasibility Study [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Bahrani, B.
A Buck Converter with Integrated Circuit Breaker [Program→]
Bansal, R.
Impact of the Capacity and Number of Inertial and Non-inertial Distributed Energy Resources within a Microgrid on its Stability Margins [Program→]
Bao, J.
Charging Control of Vanadium Redox Battery Based Energy Storage Systems with Variable Input Power [Program→]
Barbosa, J.
Quo Vadis Industry 4.0: An overview Based on Scientific Publications Analytics [Program→]
Barton, A.
Exploring the Application of Artificial Neural Network in Rural Streamflow Prediction - A Feasibility Study [Program→]
Prediction of Clogging in Stormwater Filters using Artificial Neural Network [Program→]
Bastias, A.
Finite-Control-Set Predictive Voltage Control of Paralleled Inverters in an Islanded Microgrid [Program→]
Batista, Y.
Structures of Repetitive Controllers Based on GDSC with Feedforward Action [Program→]
A Fast Distance Relay Based on Variable-Structure GDSC [Program→]
Batschauer, A.
Design of Repetitive Controllers Through Sensitivity Function [Program→]
Bauer, F.
LightClockV2 - A Motivation for Teaching Scalable Digital Hardware Design [Program→]
Bayhan, S.
Lyapunov-Function-Based Control Approach for Three-Level Four-Leg Shunt Active Power Filters with Nonlinear and Unbalanced Loads [Program→]
Open-Circuit Fault Diagnosis and Fault-Tolerant Model Predictive Control of SubMultilevel Inverter [Program→]
A Simple Control Technique for Distributed Generations in Grid-Connected and Islanded Modes [Program→]
Begum, M.
State-Space Modeling and Stability Analysis for Micro-grid considering Distributed Secondary Control [Program→]
Bi, G.
A Novel Demodulation Method Based High-Frequency Signal Injection for Sensorless SPMSM Control Considering Cross-Saturation Effect [Program→]
Bian, J.
Controllability Analysis of a Quadrotor-like Autonomous Underwater Vehicle [Program→]
Bigdeli, M.
A TLBO Algorithm for Design Optimization of DVRs in an Interline DVR (IDVR) [Program→]
Bingul, Z.
Position and Trajectory Fuzzy Control of a Laboratory 2 DOF Double Dual Twin Rotor Aero-dynamical System [Program→]
Birge, A.
Development of Reinforcement Learning Algorithm for 2-DOF Helicopter Model [Program→]
Birt, D.
Interface Compensation for Power Hardware-in-the-Loop [Program→]
Bojoi, R.
A New Laboratory for Hands-on Teaching of Electrical Engineering [Program→]
Boudour, M.
Fuzzy Logic Based Reactive Power Management for Autonomous MicroGrid [Program→]
Bründlinger, R.
Hardware-in-the-Loop Co-Simulation Based Validation of Power System Control Applications [Program→]
Buchholz, O.
Online-Identification of the Machine Parameters of an Induction Motor Drive [Program→]
Buchroithner, A.
Flywheel Energy Storage Systems Compared to Competing Technologies for Grid Load Mitigation in EV Fast-Charging Applications [Program→]
Buranasiri, P.
The property investigation of solder mixed with thermoelectrics AlZnO by using digital holography [Program→]
Burdio, J.
An Inter-Disciplinary Approach to Teaching Biomedical Electronics with an Electroporation-Applied Example [Program→]
A Versatile Hardware Platform for Teaching Resonant Power Conversion Courses [Program→]
An Application of Learner-Centered Teaching of Advanced Electromagnetics for Electronic Engineering Master Students [Program→]
Buticchi, G.
A Smart Transformer-Rectifier Unit for the More Electric Aircraft [Program→]
Space Weather Prediction to enhance the Reliability of the More Electric Aircraft [Program→]
Development of a high force density, actuation drive for an aerospace application [Program→]
Buzhinsky, I.
Synthesis-aided reliability assurance of basic block models for model checking purposes [Program→]
Böcker, J.
Online-Identification of the Machine Parameters of an Induction Motor Drive [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
C, R.
Load Commutated SCR based Multilevel Current Source Inverter fed Induction Motor Drive [Program→]
Cabral, J.
TZ-VirtIO: enabling standardized inter-partition communication in a TrustZone-assisted hypervisor [Program→]
Cai, G.
An Intelligent Multi-fault Diagnosis System for Hybrid Rocket Vehicles [Program→]
Cao, G.
Design Optimization of LLC Converter for Battery Charger with Wide Output Voltage Range [Program→]
Cao, L.
Image-distortion correction algorithm for computer-generated holographic display [Program→]
Cao, Y.
Depth Estimation From Light Field Images Via Deep Fusion Network [Program→]
Cardenas, A.
Case Study of Data Management for Power and Energy Monitoring [Program→]
Fuzzy Logic Based Reactive Power Management for Autonomous MicroGrid [Program→]
Carretero, C.
An Inter-Disciplinary Approach to Teaching Biomedical Electronics with an Electroporation-Applied Example [Program→]
An Application of Learner-Centered Teaching of Advanced Electromagnetics for Electronic Engineering Master Students [Program→]
Castro, J.
Case Study of Data Management for Power and Energy Monitoring [Program→]
Cavagnino, A.
A New Laboratory for Hands-on Teaching of Electrical Engineering [Program→]
Cecati, C.
Fast Capacitor Balancing Scheme for Low Voltage Cascaded H-bridges in Multilevel Dodecagonal Space Vector Structure [Program→]
Chan, K.
Digital Holographic System for Automotive Augmented Reality Head-Up-Display [Program→]
Chang, H.
Verification of Explicit Model Predictive Control through Double-lane-change Maneuver [Program→]
Chau, K.
Comparison of Induction Heating for Pans and Woks Using Planar Cooktops [Program→]
Chen, G.
Distributed reactive power optimization in distribution systems based on system partitioning [Program→]
An Overview of Cyber Security for Smart Grid [Program→]
Chen, G.
EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes [Program→]
Chen, H.
EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes [Program→]
Chen, J.
A Decentralized Energy Management Strategy for a Battery/Supercapacitor Hybrid Energy Storage System in Autonomous DC Microgrid [Program→]
Chen, M.
A novel stability criterion for a class of networked control systems using some integral inequalities [Program→]
Chen, P.
High-speed color sorting algorithm based on FPGA implementation [Program→]
Chen, Q.
A novel stability criterion for a class of networked control systems using some integral inequalities [Program→]
Chen, W.
Three-Dimensional Optical Correlation Based on Binary Computer-Generated Hologram [Program→]
Chen, W.
Instantaneous Current Distributing Control Collaborated with Voltage to Neutral Equalization for Grid-Tied Single-Phase Three-Wire Inverters [Program→]
Chen, X.
Adaptive Fuzzy Pseudo Inverse Output-Feedback Control for a Class of Asymmetric Hysteresis Nonlinear System [Program→]
Chen, Z.
CCR based Key Performance Indicator Monitoring Method for Industrial Processes [Program→]
Chi, M.
Hierarchical Distributed Coordination for Economic Dispatch [Program→]
Chiba, A.
Combination of oil film bearing and bearingless motor for high load capacity and stable rotation [Program→]
Ching, T.
Comparison of Induction Heating for Pans and Woks Using Planar Cooktops [Program→]
Overview of Linear Motors for Transportation Applications [Program→]
Choi, J.
Traction Control for Two-Wheel Driven Mobile Robot Driving on Ice [Program→]
Choudhury, T.
Exploring the Application of Artificial Neural Network in Rural Streamflow Prediction - A Feasibility Study [Program→]
Prediction of Clogging in Stormwater Filters using Artificial Neural Network [Program→]
Tire Size Identification using Extreme Learning Machine Algorithm [Program→]
Chugo, D.
Autonomous Mobile Robot Navigation: Consideration of the Pedestrian’s Dynamic Personal Space [Program→]
Chunying, G.
Two-stage Aviation Rectifier based on cascaded H-Bridge [Program→]
Corbalan, M.
Oriented trajectories as a method for audience measurement [Program→]
Cupelli, M.
Case Study of Active Disturbance Rejection Control Approaches for MVDC Microgrids [Program→]
Cárdenas, R.
Predictive Control Strategy for an Induction Machine fed by a 3L-NPC Converter with Fixed Switching Frequency and Improved Tracking Error [Program→]
Phase-Shifted Model Predictive Control of a Three-Level Active-NPC Converter [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Dang, T.
On the road to Industry 4.0: a fieldbus architecture to acquire specific smart instrumentation data in existing industrial plant for predictive maintenance [Program→]
Deng, B.
Overview of Linear Motors for Transportation Applications [Program→]
Derler, B.
Getting fit for the future: Optimizing energy usage in existing buildings by adding non-invasive sensor networks [Program→]
Deulet, N.
On the road to Industry 4.0: a fieldbus architecture to acquire specific smart instrumentation data in existing industrial plant for predictive maintenance [Program→]
Dias Filho, R.
A Fast Distance Relay Based on Variable-Structure GDSC [Program→]
Diego Garcia, R.
Monitoring Oxy-Coal Flame Stability [Program→]
Diwold, K.
Getting fit for the future: Optimizing energy usage in existing buildings by adding non-invasive sensor networks [Program→]
Djema, M.
Fuzzy Logic Based Reactive Power Management for Autonomous MicroGrid [Program→]
Doki, K.
Study on an Evaluation Method of Coincident Timing Skill of Driver based on Driving Behavior Model of Brake Operation [Program→]
Doki, S.
Study on an Evaluation Method of Coincident Timing Skill of Driver based on Driving Behavior Model of Brake Operation [Program→]
Donoso, F.
Predictive Control Strategy for an Induction Machine fed by a 3L-NPC Converter with Fixed Switching Frequency and Improved Tracking Error [Program→]
Dou, W.
Design Optimization of LLC Converter for Battery Charger with Wide Output Voltage Range [Program→]
Dou, X.
Distributed reactive power optimization in distribution systems based on system partitioning [Program→]
Doumbia, M.
Fuzzy Logic Based Reactive Power Management for Autonomous MicroGrid [Program→]
Du, D.
Experimental Analysis of Networked Visual Servo Inverted Pendulum System with Noise Attack [Program→]
Du, H.
POF-CAN-Based Distributed System for Thermal Expansion Monitoring [Program→]
Duan, X.
Distributed reactive power optimization in distribution systems based on system partitioning [Program→]
de Souza, H.
Structures of Repetitive Controllers Based on GDSC with Feedforward Action [Program→]
A nk +/- m - Order Harmonic Repetitive Control Scheme with Improved Stability Characteristics [Program→]
A Fast Distance Relay Based on Variable-Structure GDSC [Program→]
Design of Repetitive Controllers Through Sensitivity Function [Program→]
dos Santos, R.
WiFi based Indoor Positioning using Pattern Recognition [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Edwards, A.
WiFi based Indoor Positioning using Pattern Recognition [Program→]
Eldeeb, H.
Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives [Program→]
Estebsari, A.
A New Laboratory for Hands-on Teaching of Electrical Engineering [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Fahimi, B.
Influencing Radial Vibration in Switched Reluctance Machine via Altering the Design of Endcaps [Program→]
Falkowski, P.
Comparative Analysis of Finite Control Set Model Predictive Control Methods for Grid-Connected AC-DC Converters with LCL Filter [Program→]
Fan, Z.
Current Sensor Fault Diagnosis Based on Sliding Mode Observer for Permanent Magnet Synchronous Traction Motor [Program→]
Fandel, A.
Development of Reinforcement Learning Algorithm for 2-DOF Helicopter Model [Program→]
Fang, R.
Modeling and Stability Analysis of DFIG based D-Q Impedance under Weak Networks [Program→]
Fang, X.
Bone Scintigraphy Retrieval Using SIFT-based Fly Local Sensitive Hashing [Program→]
Fang, Y.
POF-CAN-Based Distributed System for Thermal Expansion Monitoring [Program→]
Felsberger, R.
Low Power Ice Detection With Capacitive and Impedance Spectroscopy-based Measurements [Program→]
Fernando, J.
Linear AC voltage regulator: Implementation details of a multi-winding approach [Program→]
Fernando, N.
An Integrated SRM Drive with Constant Current, Constant Voltage Charging Capability for Electric Vehicle Application [Program→]
Model Predictive Control of an Electric Vehicle Motor Drive Integrated Battery Charger [Program→]
A New Modular Asymmetrical Half-Bridge Switched Reluctance Motor Integrated Drive for Electric Vehicle Application [Program→]
MPC and Energy Storage Based Frequency Regulation Strategy for Hybrid Electric Ships [Program→]
Fernão Pires, V.
Laboratory setup for induction motor fault detection teaching [Program→]
Ferreira, M.
Application of the two-stage one-dimensional cutting stock problem in the steel industry [Program→]
Fischer, C.
Communication Abstraction Supports Network Resource Virtualisation in Automation [Program→]
Flatscher, M.
Low Power Ice Detection With Capacitive and Impedance Spectroscopy-based Measurements [Program→]
Fletcher, J.
An Interleaved Boost Inverter Based Battery-Supercapacitor Hybrid Energy Storage System with a Reduced Number of Current Sensors [Program→]
Model Predictive Control of a Multi-String LCL-Type Grid-Connected H-NPC PV Converter [Program→]
Charging Control of Vanadium Redox Battery Based Energy Storage Systems with Variable Input Power [Program→]
Flynn, D.
An Advanced Gas Metal Arc Welding Machine Design for Low Spatter Welding [Program→]
Foster, M.
An Experimental Investigation of MOSFET Intrisic Body Diode Performance [Program→]
Fotuhi, M.
Position and Trajectory Fuzzy Control of a Laboratory 2 DOF Double Dual Twin Rotor Aero-dynamical System [Program→]
Franchi, N.
Communication Abstraction Supports Network Resource Virtualisation in Automation [Program→]
Fu, L.
An Improved ORB Algorithm Based on Multi-feature Fusion [Program→]
Design of PM2.5 Monitoring System under the Human Micro-environment [Program→]
Fu, Z.
Impedance Modeling and Stability Analysis of Three-phase Inverter with an LCL Filter [Program→]
Fujimoto, H.
Proposal of State-Dependent Minimum Variance Estimation of Load-Side External Torque Considering Modeling and Measurement Errors [Program→]
Fujimoto, Y.
Two-channel Bilateral Control of Delta Robots with Gravity Compensation [Program→]
Fujita, K.
Development of the Grip Dynamometer to Measure the Force of Each Finger [Program→]
Fukushima, E.
Evaluation of Lower-Limb Rehabilitation Based on Muscle Fatigue [Program→]
Fumihiko, F.
Current Sensor Fault Diagnosis Based on Sliding Mode Observer for Permanent Magnet Synchronous Traction Motor [Program→]
Führinger, R.
Challenges of in-situ thermal characterization of thin-film isolation layers for printed electronics [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Gago, J.
Oriented trajectories as a method for audience measurement [Program→]
Galea, M.
Development of a high force density, actuation drive for an aerospace application [Program→]
Ganeshan, A.
Improved Controller Design for a Microgrid Fuel Cell Based Energy Storage System [Program→]
Gang, H.
Current Sensor Fault Diagnosis Based on Sliding Mode Observer for Permanent Magnet Synchronous Traction Motor [Program→]
Gao, F.
Dual Phase Shift PWM-CSCs Based Hybrid HVDC Transmission System [Program→]
Gao, H.
Contouring Control of Linear Motor Direct-Drive X-Y Table via Chattering-Free Discrete-Time Sliding Mode Control [Program→]
Gao, L.
Modeling of DoS Attack and Defense in Networked Control Systems Using Game Theory [Program→]
Gao, M.
High-speed color sorting algorithm based on FPGA implementation [Program→]
Gao, Y.
Research on High Power Stacked Boost Converters for Aerostat [Program→]
Gautam, S.
Feasibility Study on Using Electrical Home Appliances for Distributed Reactive Power Support [Program→]
Gerada, C.
A Smart Transformer-Rectifier Unit for the More Electric Aircraft [Program→]
Space Weather Prediction to enhance the Reliability of the More Electric Aircraft [Program→]
Gladwin, D.
An Experimental Analysis of the Effect of Cell Degradation on Dynamic Charge Acceptance in Lead-Acid Cells [Program→]
Gong, H.
Stabilization of linear systems by sampled-data feedback control subject to Markovian jumping [Program→]
Gorzalczany, M.
Electricity consumption data clustering for load profiling using generalized self-organizing neural networks with evolving splitting-merging structures [Program→]
Grubmüller, M.
A Digital Isolated High Voltage Probe for Measurements in Power Electronics [Program→]
Low Power Ice Detection With Capacitive and Impedance Spectroscopy-based Measurements [Program→]
Guan, Z.
Hierarchical Distributed Coordination for Economic Dispatch [Program→]
Guevara, M.
Application of the two-stage one-dimensional cutting stock problem in the steel industry [Program→]
Guillaume, R.
Communication Abstraction Supports Network Resource Virtualisation in Automation [Program→]
Guo, H.
Pulse-modulated intermittent control for scaled consensus of second-order multi-agent systems [Program→]
Guo, J.
Space Weather Prediction to enhance the Reliability of the More Electric Aircraft [Program→]
Guo, Y.
Efficient Global Network Resource Pre-allocation in SDN based Cloud Centers [Program→]
Guo, Z.
The accurate modeling and stability analysis for flyback converter based on describing function method [Program→]
Guzman, C.
Case Study of Data Management for Power and Energy Monitoring [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Hackl, C.
Enhanced Electromechanical Modeling of Asymmetrical Dual Three-Phase IPMSM Drives [Program→]
Han, J.
Current Control Strategy of Harmonic Current Injection System for Power Capacitor [Program→]
Han, Q.
Cyber attack detection in platoon-based vehicular networked control systems [Program→]
Han, W.
Comparison of Induction Heating for Pans and Woks Using Planar Cooktops [Program→]
Han, X.
Current Control Strategy of Harmonic Current Injection System for Power Capacitor [Program→]
Han, Y.
Bone Scintigraphy Retrieval Using SIFT-based Fly Local Sensitive Hashing [Program→]
Hancke, G.
Cryptography Methods for Software-Defined Wireless Sensor Networks [Program→]
WiFi based Indoor Positioning using Pattern Recognition [Program→]
Hancke, G.
Problem of Wireless Fingerprint Duplication in Fingerprinting based Indoor Localization [Program→]
Analysis of BLE based Indoor Localization System with Multiple Transmission Power Levels [Program→]
Hanif, A.
An LPV H∞ Control Design for the Varying Rotor Resistance Effects on the Dynamic Performance of Induction Motors [Program→]
Hara, T.
Theoretical Derivation of Phase Current Profile for Switched Reluctance Motors to Suppress Radial Force Ripple and Torque Ripple [Program→]
Harini, B.
Stability of The Rotor Flux Oriented Speed Sensorless Permanent Magnet Synchronous Motor Control [Program→]
Haro, H.
Development of the Grip Dynamometer to Measure the Force of Each Finger [Program→]
Hashimoto, H.
Evaluation of Lower-Limb Rehabilitation Based on Muscle Fatigue [Program→]
The Influence of Gesture during the Presentation on Intercultural Learners [Program→]
Autonomous Mobile Robot Navigation: Consideration of the Pedestrian’s Dynamic Personal Space [Program→]
Hashimoto, K.
Study on an Evaluation Method of Coincident Timing Skill of Driver based on Driving Behavior Model of Brake Operation [Program→]
Hassan, W.
Optimal Analysis and Design of DC-DC Converter to Achieve High Voltage Conversion Gain and High Efficiency for Renewable Energy Systems [Program→]
He, W.
Pulse-modulated intermittent control for scaled consensus of second-order multi-agent systems [Program→]
He, Z.
Image-distortion correction algorithm for computer-generated holographic display [Program→]
Heikkonen, J.
Future Educational Technology with Big Data and Learning Analytics [Program→]
Heinzelmann, A.
A novel non-isolated active charge balancing architecture for lithium-ion batteries [Program→]
Heron, M.
HF ocean radars in ship navigation [Program→]
Heuvelmans, M.
A modular medium voltage IGCT gate driver supply [Program→]
Hink, D.
A novel non-isolated active charge balancing architecture for lithium-ion batteries [Program→]
Hiraki, E.
Theoretical Derivation of Phase Current Profile for Switched Reluctance Motors to Suppress Radial Force Ripple and Torque Ripple [Program→]
Hoang, D.
Deep Belief Network and Dempster-Shafer Evidence Theory for Bearing Fault Diagnosis [Program→]
Holmes, D.
Improved Controller Design for a Microgrid Fuel Cell Based Energy Storage System [Program→]
Analytical Determination of the ZVS Boundaries for Resonant Dual Active Bridge Converters [Program→]
Hossain, J.
A Hybrid Communication Platform for Multi-Microgrid Energy Management System Optimization [Program→]
Hossain, M.
An LPV H∞ Control Design for the Varying Rotor Resistance Effects on the Dynamic Performance of Induction Motors [Program→]
Hou, H.
Reaching Law Based Sliding Mode Control For Discrete Time System with Uncertainty [Program→]
Hredzak, B.
An Interleaved Boost Inverter Based Battery-Supercapacitor Hybrid Energy Storage System with a Reduced Number of Current Sensors [Program→]
Hu, B.
Hierarchical Distributed Coordination for Economic Dispatch [Program→]
Hu, C.
Comparison of Two Performance Optimization Approaches for Data-driven Design of Fault-Tolerant Control Systems [Program→]
Hu, M.
Distributed reactive power optimization in distribution systems based on system partitioning [Program→]
Hu, X.
Hierarchical Distributed Coordination for Economic Dispatch [Program→]
Hu, X.
An Improved ORB Algorithm Based on Multi-feature Fusion [Program→]
Hu, Y.
EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes [Program→]
Hua, S.
Current Sensor Fault Diagnosis Based on Sliding Mode Observer for Permanent Magnet Synchronous Traction Motor [Program→]
Huang, J.
High-speed color sorting algorithm based on FPGA implementation [Program→]
Huang, J.
Reaching Law Based Sliding Mode Control For Discrete Time System with Uncertainty [Program→]
Robust Nonlinear Adaptive Backstepping Coordinated Control for Boiler-Turbine Units [Program→]
Huang, S.
Overview of Linear Motors for Transportation Applications [Program→]
Huo, M.
A Data-Driven Process Monitoring Approach for Dynamic Processes with Deterministic Disturbance [Program→]
Huo, Q.
A New Coordinated Operation Strategy for Unified Power Quality Conditioner (UPQC) [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Ibrahim, Y.
Tire Size Identification using Extreme Learning Machine Algorithm [Program→]
Imaoka, J.
Review of Current Balance Mechanism in Multiphase LLC Resonant Converters [Program→]
Imthias, M.
Fast Capacitor Balancing Scheme for Low Voltage Cascaded H-bridges in Multilevel Dodecagonal Space Vector Structure [Program→]
Inoue, A.
Design of a Two-Inertia Control System using a Fictitious Exogenous Signal [Program→]
Ishikura, Y.
Review of Current Balance Mechanism in Multiphase LLC Resonant Converters [Program→]
Ito, T.
Convolutional neural network-based regression for depth prediction in digital holography [Program→]
Izhar, U.
A Novel PLC Impedance Conditioning Technique for Quasi-Common Mode Power-Line Antenna Injection [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
J. Pires, A.
Laboratory setup for induction motor fault detection teaching [Program→]
Jamborsalamati, P.
A Hybrid Communication Platform for Multi-Microgrid Energy Management System Optimization [Program→]
Janse van Rensburg, P.
A Novel PLC Impedance Conditioning Technique for Quasi-Common Mode Power-Line Antenna Injection [Program→]
Jayasinghe, S.
Ultra-high Step-up DC-DC Converter Family Based on Feed-forward Capacitor and Coupled Inductor [Program→]
MPC and Energy Storage Based Frequency Regulation Strategy for Hybrid Electric Ships [Program→]
Jia, D.
A New Coordinated Operation Strategy for Unified Power Quality Conditioner (UPQC) [Program→]
Jia, S.
Safety Message Dissemination Using Edge Computing in Heterogeneous VANETs [Program→]
Jiang, C.
Comparison of Induction Heating for Pans and Woks Using Planar Cooktops [Program→]
Jie, C.
Two-stage Aviation Rectifier based on cascaded H-Bridge [Program→]
Jin, G.
Image-distortion correction algorithm for computer-generated holographic display [Program→]
Jin, Z.
Finite-set Model-Based Predictive Control of a Novel Alternate Arm Modular Multilevel Converter [Program→]
Jingyuan, Y.
The topology research of series-parallel multi-function composite controller for DC power distribution network [Program→]
Finite-set Model-Based Predictive Control of a Novel Alternate Arm Modular Multilevel Converter [Program→]
Jo, K.
Probabilistic Change Detector with Human Verifier for Intelligent Sterile Zone Monitoring [Program→]
Jung, O.
Smart Grid Reference Architecture, an Approach on a Secure and Model-Driven Implementation [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
K, G.
Fast Capacitor Balancing Scheme for Low Voltage Cascaded H-bridges in Multilevel Dodecagonal Space Vector Structure [Program→]
Kahandawa, G.
Tire Size Identification using Extreme Learning Machine Algorithm [Program→]
Kakue, T.
Convolutional neural network-based regression for depth prediction in digital holography [Program→]
Kanagawa, T.
Development of the Grip Dynamometer to Measure the Force of Each Finger [Program→]
Kandra, H.
Exploring the Application of Artificial Neural Network in Rural Streamflow Prediction - A Feasibility Study [Program→]
Prediction of Clogging in Stormwater Filters using Artificial Neural Network [Program→]
Kang, H.
Deep Belief Network and Dempster-Shafer Evidence Theory for Bearing Fault Diagnosis [Program→]
Kang, Y.
Fault-Tolerant Cooperative Tracking Control of Nonlinear Affine Systems Using Integral Sliding Mode Control [Program→]
Kanlayasiri, K.
The property investigation of solder mixed with thermoelectrics AlZnO by using digital holography [Program→]
Kanth, R.
Future Educational Technology with Big Data and Learning Analytics [Program→]
Katsura, S.
Extended Reproduction of Demonstration Motion Using Variational Autoencoder [Program→]
Auxiliary Circuit for Velocity-Acceleration Estimation from Position Data Using Pipeline Differentiating Unit [Program→]
Kawakami, T.
Inference of Grasping Pattern from Object Image Based on Interaction Descriptor [Program→]
Kazemy, A.
Controller Design for Takagi-Sugeno Fuzzy Systems with Nonlinear Consequent Part via Sampled-Data Measurements [Program→]
Khalid, M.
A Novel Operation Strategy of Battery-Supercapacitor Hybrid Energy Storage System Providing Frequency Regulation Service [Program→]
Reliability Assessment of Microgrids with Multiple Distributed Generations and Hybrid Energy Storage [Program→]
Economic Dispatch Using Functional Network Wind Forecast Model [Program→]
Advanced Direct Torque Control of Four Switch Fed Two-Phase Symmetric Induction Motor [Program→]
Khan, M.
Optimal tracking control of flight trajectory for unmanned aerial vehicles [Program→]
Kiani, M.
Influencing Radial Vibration in Switched Reluctance Machine via Altering the Design of Endcaps [Program→]
Kieslinger, D.
Challenges of in-situ thermal characterization of thin-film isolation layers for printed electronics [Program→]
Kim, T.
Recent progress of an optical scanning holography camera [invited] [Program→]
Kinoshita, T.
Design of a Two-Inertia Control System using a Fictitious Exogenous Signal [Program→]
Kipongo, J.
Topology Discovery Protocol for Software Defined Wireless Sensor Network: Solutions and Open Issues [Program→]
Ko, Y.
A Smart Transformer-Rectifier Unit for the More Electric Aircraft [Program→]
Koag, H.
Functional Safety Improvement of Electric Power Steering System by using Electronic Stability Control System [Program→]
Kobayashi, K.
Network-based control with state prediction \\for time-delayed system [Program→]
Kollmann, S.
Using Smart Breakers for Demand Side Management in Smart Grids [Program→]
Komurcugil, H.
Low Complexity Model Predictive Control of PUC5 based Dynamic Voltage Restorer [Program→]
Komurcugil, H.
Lyapunov-Function-Based Control Approach for Three-Level Four-Leg Shunt Active Power Filters with Nonlinear and Unbalanced Loads [Program→]
Kondo, Y.
Development of the Grip Dynamometer to Measure the Force of Each Finger [Program→]
Kong, W.
Interface Compensation for Power Hardware-in-the-Loop [Program→]
Konstantinou, G.
Dual Phase Shift PWM-CSCs Based Hybrid HVDC Transmission System [Program→]
Energy Balancing of the Alternate Arm Converter under Parameter Variations [Program→]
Koo, C.
A Humans’ Status Detection Scheme for Industrial Safety [Program→]
Korzonek, M.
Stability of a New Adaptive Full-order Observer with an Auxiliary Variable [Program→]
Kou, L.
Controllability Analysis of a Quadrotor-like Autonomous Underwater Vehicle [Program→]
Krammer, L.
Getting fit for the future: Optimizing energy usage in existing buildings by adding non-invasive sensor networks [Program→]
Krein, P.
An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging [Program→]
Krismanto, A.
Low-Frequency Oscillatory Stability Study on 500 kV Java-Indonesian Electric Grid [Program→]
Comparison of Battery Energy Storage Models for Small Signal Stability in Power System [Program→]
Krummacker, D.
Communication Abstraction Supports Network Resource Virtualisation in Automation [Program→]
Kuang, Z.
Contouring Control of Linear Motor Direct-Drive X-Y Table via Chattering-Free Discrete-Time Sliding Mode Control [Program→]
Kularatna, N.
Linear AC voltage regulator: Implementation details of a multi-winding approach [Program→]
Kumar, J.
Hardware Implementation of Power Quality Improvement in Photo-voltaic Fed Cascaded H-bridge Multilevel Inverter [Program→]
Kumar, S.
Introducing Network Multi-tenancy for Cloud-based Enterprise Resource Planning: An IoT Application [Program→]
Kunwar, A.
Impact of the Capacity and Number of Inertial and Non-inertial Distributed Energy Resources within a Microgrid on its Stability Margins [Program→]
Kuo, S.
Symbiotic Controller Design Using a Memory-Based FSM Model [Program→]
Kurumatani, H.
Auxiliary Circuit for Velocity-Acceleration Estimation from Position Data Using Pipeline Differentiating Unit [Program→]
Kusumi, T.
Theoretical Derivation of Phase Current Profile for Switched Reluctance Motors to Suppress Radial Force Ripple and Torque Ripple [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Laakso, M.
Future Educational Technology with Big Data and Learning Analytics [Program→]
Lai, L.
A Humans’ Status Detection Scheme for Industrial Safety [Program→]
Latif, A.
Hardware-in-the-Loop Co-Simulation Based Validation of Power System Control Applications [Program→]
Lechner, D.
Getting fit for the future: Optimizing energy usage in existing buildings by adding non-invasive sensor networks [Program→]
Lee, E.
Instantaneous Current Distributing Control Collaborated with Voltage to Neutral Equalization for Grid-Tied Single-Phase Three-Wire Inverters [Program→]
Lee, H.
Instantaneous Current Distributing Control Collaborated with Voltage to Neutral Equalization for Grid-Tied Single-Phase Three-Wire Inverters [Program→]
Lee, J.
Verification of Explicit Model Predictive Control through Double-lane-change Maneuver [Program→]
Leimgruber, F.
Hardware-in-the-Loop Co-Simulation Based Validation of Power System Control Applications [Program→]
Leitão, P.
Quo Vadis Industry 4.0: An overview Based on Scientific Publications Analytics [Program→]
Lezana, P.
Phase-Shifted Model Predictive Control of a Three-Level Active-NPC Converter [Program→]
Li, C.
Hierarchical Distributed Coordination for Economic Dispatch [Program→]
Li, H.
The accurate modeling and stability analysis for flyback converter based on describing function method [Program→]
Li, J.
H∞ synchronization control for uncertain coronary artery systems with time-delay based on improved Jensen inequality [Program→]
Li, J.
A Correlation Filter based Tracker Integrating Adaptive Updating Scheme and Motion Prediction [Program→]
Li, K.
A Data-Driven Process Monitoring Approach for Dynamic Processes with Deterministic Disturbance [Program→]
Li, L.
State-Space Modeling and Stability Analysis for Micro-grid considering Distributed Secondary Control [Program→]
Li, L.
Off-Policy Q-Learning for Infinite Horizon LQR Problem with Unknown Dynamics [Program→]
Li, M.
Fault Diagnosis of Linear Discrete Time-Varying System with Multiplicative Noise Based on Parity Space Method [Program→]
Li, P.
Distributed reactive power optimization in distribution systems based on system partitioning [Program→]
Li, W.
Overview of Linear Motors for Transportation Applications [Program→]
Li, X.
Highly sensing characteristics of gold nanorings based on DDA analysis [Program→]
Li, Y.
Robust Nonlinear Adaptive Backstepping Coordinated Control for Boiler-Turbine Units [Program→]
Li, Y.
Comparison of Two Performance Optimization Approaches for Data-driven Design of Fault-Tolerant Control Systems [Program→]
Fault Diagnosis of Linear Discrete Time-Varying System with Multiplicative Noise Based on Parity Space Method [Program→]
Li, Y.
Dual Phase Shift PWM-CSCs Based Hybrid HVDC Transmission System [Program→]
Li, Y.
Charging Control of Vanadium Redox Battery Based Energy Storage Systems with Variable Input Power [Program→]
Li, Y.
Influencing Radial Vibration in Switched Reluctance Machine via Altering the Design of Endcaps [Program→]
Li, Z.
Research on High Power Stacked Boost Converters for Aerostat [Program→]
Li, Z.
Dual Phase Shift PWM-CSCs Based Hybrid HVDC Transmission System [Program→]
Li, Z.
A novel stability criterion for a class of networked control systems using some integral inequalities [Program→]
Li, Z.
State-Space Modeling and Stability Analysis for Micro-grid considering Distributed Secondary Control [Program→]
Libo, H.
The topology research of series-parallel multi-function composite controller for DC power distribution network [Program→]
Lin, J.
Prediction of Clogging in Stormwater Filters using Artificial Neural Network [Program→]
Lin, W.
Contouring Control of Linear Motor Direct-Drive X-Y Table via Chattering-Free Discrete-Time Sliding Mode Control [Program→]
Lin, X.
Key Physical Techniques for Implementing URLLC [Program→]
Liserre, M.
A Smart Transformer-Rectifier Unit for the More Electric Aircraft [Program→]
Liu, B.
Key Physical Techniques for Implementing URLLC [Program→]
Liu, C.
The accurate modeling and stability analysis for flyback converter based on describing function method [Program→]
Liu, G.
Highly sensing characteristics of gold nanorings based on DDA analysis [Program→]
Liu, H.
An Improved Y-Source Inverter with Continuous Input Current [Program→]
Liu, K.
An Improved Y-Source Inverter with Continuous Input Current [Program→]
Liu, S.
Jacobian Estimation with Adaptive Kalman Filter for Uncalibrated Visual Servo Using Homography [Program→]
Liu, T.
Predictive Controller Design for a Matrix-Converter Based IPMSM Position Control System [Program→]
Predictive Model-Based Speed Controller and Model-Free Current Controller in a Fault-Tolerant PMSM Drive [Program→]
Liu, W.
Safety Message Dissemination Using Edge Computing in Heterogeneous VANETs [Program→]
Liu, Y.
Adaptive Fuzzy Pseudo Inverse Output-Feedback Control for a Class of Asymmetric Hysteresis Nonlinear System [Program→]
Liu, Z.
Predictive Control-Based Consensus of Networked Unmanned Surface Vehicle Formation Systems [Program→]
Liu, Z.
Hierarchical Distributed Coordination for Economic Dispatch [Program→]
Lixin, W.
The topology research of series-parallel multi-function composite controller for DC power distribution network [Program→]
Lopes, J.
DIHyper: providing lifetime Hypervisor Data Integrity [Program→]
Lopez-Alonso, B.
An Inter-Disciplinary Approach to Teaching Biomedical Electronics with an Electroporation-Applied Example [Program→]
Lopez-Palma, M.
Oriented trajectories as a method for audience measurement [Program→]
Lu, D.
Optimal Analysis and Design of DC-DC Converter to Achieve High Voltage Conversion Gain and High Efficiency for Renewable Energy Systems [Program→]
Feasibility Study on Using Electrical Home Appliances for Distributed Reactive Power Support [Program→]
Phase-Shifted Model Predictive Control of a Three-Level Active-NPC Converter [Program→]
Lu, J.
A Hybrid Communication Platform for Multi-Microgrid Energy Management System Optimization [Program→]
Lu, Q.
A Probability Distribution Based Cooperative Search Approach for Stochastic Source Localization [Program→]
Lu, X.
A Correlation Filter based Tracker Integrating Adaptive Updating Scheme and Motion Prediction [Program→]
Lu, Y.
Feasibility Study on Using Electrical Home Appliances for Distributed Reactive Power Support [Program→]
Lucia, O.
An Inter-Disciplinary Approach to Teaching Biomedical Electronics with an Electroporation-Applied Example [Program→]
Lucia, O.
A Versatile Hardware Platform for Teaching Resonant Power Conversion Courses [Program→]
Model Predictive Control for Resonant Power Converters Applied to Induction Heating [Program→]
An Application of Learner-Centered Teaching of Advanced Electromagnetics for Electronic Engineering Master Students [Program→]
Lucia, S.
Model Predictive Control for Resonant Power Converters Applied to Induction Heating [Program→]
Luo, H.
A Data-Driven Process Monitoring Approach for Dynamic Processes with Deterministic Disturbance [Program→]
Luo, R.
Autonomous Mobile Robot Intrinsic Navigation Based on Visual Topological Map [Program→]
Lv, F.
H∞ synchronization control for uncertain coronary artery systems with time-delay based on improved Jensen inequality [Program→]
López Deras, P.
Two-channel Bilateral Control of Delta Robots with Gravity Compensation [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Ma, C.
An Improved ORB Algorithm Based on Multi-feature Fusion [Program→]
Ma, H.
An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging [Program→]
Ma, H.
Efficient Global Network Resource Pre-allocation in SDN based Cloud Centers [Program→]
Ma, H.
Damping Control for Systems with Sinusoidal Disturbances Based on Internal Model Principle [Program→]
TPPMA: New Adaptive BP Neural Network Based on PSO and PCA Algorithms [Program→]
Ma, Q.
Fault-Tolerant Cooperative Tracking Control of Nonlinear Affine Systems Using Integral Sliding Mode Control [Program→]
Makino, K.
Development of the Grip Dynamometer to Measure the Force of Each Finger [Program→]
Marks, N.
Interface Compensation for Power Hardware-in-the-Loop [Program→]
Martins, J.
TZ-VirtIO: enabling standardized inter-partition communication in a TrustZone-assisted hypervisor [Program→]
DIHyper: providing lifetime Hypervisor Data Integrity [Program→]
Martins, J.
Laboratory setup for induction motor fault detection teaching [Program→]
Matsuo, T.
Inference of Grasping Pattern from Object Image Based on Interaction Descriptor [Program→]
McGrath, B.
An Optimal Distributed MPC scheme for Automatic Generation Control under Network Constraints [Program→]
Series-Cascaded AC Microgrid Topology Integrating Non-dispatchable Distributed Generation and Storage [Program→]
Improved Controller Design for a Microgrid Fuel Cell Based Energy Storage System [Program→]
Analytical Determination of the ZVS Boundaries for Resonant Dual Active Bridge Converters [Program→]
Meegahapola, L.
An Optimal Distributed MPC scheme for Automatic Generation Control under Network Constraints [Program→]
Improved Controller Design for a Microgrid Fuel Cell Based Energy Storage System [Program→]
Meisel, M.
A Multi-Agent-Based Middleware for the Development of Complex Architectures [Program→]
Using Smart Breakers for Demand Side Management in Smart Grids [Program→]
Smart Grid Reference Architecture, an Approach on a Secure and Model-Driven Implementation [Program→]
LightClockV2 - A Motivation for Teaching Scalable Digital Hardware Design [Program→]
Merieux, C.
On the road to Industry 4.0: a fieldbus architecture to acquire specific smart instrumentation data in existing industrial plant for predictive maintenance [Program→]
Mi, Z.
Efficient Global Network Resource Pre-allocation in SDN based Cloud Centers [Program→]
Miah, M.
Development of Reinforcement Learning Algorithm for 2-DOF Helicopter Model [Program→]
Minohara, A.
Network-based control with state prediction \\for time-delayed system [Program→]
Mishra, J.
A Second-order Sliding Mode Voltage Oriented Control of Three-phase Active Front End Rectifier [Program→]
Mithulananthan, N.
Low-Frequency Oscillatory Stability Study on 500 kV Java-Indonesian Electric Grid [Program→]
Comparison of Battery Energy Storage Models for Small Signal Stability in Power System [Program→]
Miyamamoto, M.
Development of the Grip Dynamometer to Measure the Force of Each Finger [Program→]
Miyamoto, K.
Active Structural Control with Suppression of Absolute Acceleration Using Equivalent-Input-Disturbance Approach [Program→]
Moghimi, M.
A Hybrid Communication Platform for Multi-Microgrid Energy Management System Optimization [Program→]
Mohapatra, S.
A Low Computational Cost Model Predictive Controller for Grid Connected Three Phase Four Wire Multilevel Inverter [Program→]
Molnar, D.
Getting fit for the future: Optimizing energy usage in existing buildings by adding non-invasive sensor networks [Program→]
Monti, A.
Case Study of Active Disturbance Rejection Control Approaches for MVDC Microgrids [Program→]
Moodi, H.
Controller Design for Takagi-Sugeno Fuzzy Systems with Nonlinear Consequent Part via Sampled-Data Measurements [Program→]
Mora, A.
Predictive Control Strategy for an Induction Machine fed by a 3L-NPC Converter with Fixed Switching Frequency and Improved Tracking Error [Program→]
Phase-Shifted Model Predictive Control of a Three-Level Active-NPC Converter [Program→]
Moradlou, M.
A TLBO Algorithm for Design Optimization of DVRs in an Interline DVR (IDVR) [Program→]
Morros, R.
Oriented trajectories as a method for audience measurement [Program→]
Mousavinejad, E.
Cyber attack detection in platoon-based vehicular networked control systems [Program→]
Mubarok, M.
Predictive Controller Design for a Matrix-Converter Based IPMSM Position Control System [Program→]
Murakami, T.
Compensation Method for Environmental Variations of Motion Reproduction System Based on the Different Control Impedance [Program→]
Evaluation of Gait Phase Detection Methods for Walking Assist Robot [Program→]
Muramatsu, S.
Autonomous Mobile Robot Navigation: Consideration of the Pedestrian’s Dynamic Personal Space [Program→]
Muto, H.
Identification of Internal Impedance Parameters of Multi-Inertial Environment For Haptic Rendering [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Nakajo, Y.
Building Thermal Performance Assessments Using Simple Sensors for the Green New Deal in Japan [Program→]
Navarro, D.
Model Predictive Control for Resonant Power Converters Applied to Induction Heating [Program→]
Nayanasiri, D.
Ultra-high Step-up DC-DC Converter Family Based on Feed-forward Capacitor and Coupled Inductor [Program→]
MPC and Energy Storage Based Frequency Regulation Strategy for Hybrid Electric Ships [Program→]
Neto, R.
Structures of Repetitive Controllers Based on GDSC with Feedforward Action [Program→]
A nk +/- m - Order Harmonic Repetitive Control Scheme with Improved Stability Characteristics [Program→]
A Fast Distance Relay Based on Variable-Structure GDSC [Program→]
Design of Repetitive Controllers Through Sensitivity Function [Program→]
Nevalainen, P.
Future Educational Technology with Big Data and Learning Analytics [Program→]
Neves, F.
Structures of Repetitive Controllers Based on GDSC with Feedforward Action [Program→]
A nk +/- m - Order Harmonic Repetitive Control Scheme with Improved Stability Characteristics [Program→]
A Fast Distance Relay Based on Variable-Structure GDSC [Program→]
Design of Repetitive Controllers Through Sensitivity Function [Program→]
Niakinezhad, M.
An Integrated SRM Drive with Constant Current, Constant Voltage Charging Capability for Electric Vehicle Application [Program→]
Model Predictive Control of an Electric Vehicle Motor Drive Integrated Battery Charger [Program→]
A New Modular Asymmetrical Half-Bridge Switched Reluctance Motor Integrated Drive for Electric Vehicle Application [Program→]
Nishi, H.
Building Thermal Performance Assessments Using Simple Sensors for the Green New Deal in Japan [Program→]
Nishino, N.
Autonomous Mobile Robot Navigation: Consideration of the Pedestrian’s Dynamic Personal Space [Program→]
Niu, X.
Bone Scintigraphy Retrieval Using SIFT-based Fly Local Sensitive Hashing [Program→]
Noah, M.
Review of Current Balance Mechanism in Multiphase LLC Resonant Converters [Program→]
Nouti, D.
Case Study of Active Disturbance Rejection Control Approaches for MVDC Microgrids [Program→]
Nutkani, I.
Autonomous Power Sharing Schemes for Series-Cascaded DC Microgrid [Program→]
Series-Cascaded AC Microgrid Topology Integrating Non-dispatchable Distributed Generation and Storage [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Ogawa, Y.
Inference of Grasping Pattern from Object Image Based on Interaction Descriptor [Program→]
Oh, S.
Traction Control for Two-Wheel Driven Mobile Robot Driving on Ice [Program→]
Ohishi, K.
Identification of Internal Impedance Parameters of Multi-Inertial Environment For Haptic Rendering [Program→]
Ohnishi, K.
Compensation Method for Environmental Variations of Motion Reproduction System Based on the Different Control Impedance [Program→]
Ohnishi, K.
Evaluation of Gait Phase Detection Methods for Walking Assist Robot [Program→]
Okano, T.
Compensation Method for Environmental Variations of Motion Reproduction System Based on the Different Control Impedance [Program→]
Evaluation of Gait Phase Detection Methods for Walking Assist Robot [Program→]
Oliveira, A.
TZ-VirtIO: enabling standardized inter-partition communication in a TrustZone-assisted hypervisor [Program→]
Olwal, T.
Topology Discovery Protocol for Software Defined Wireless Sensor Network: Solutions and Open Issues [Program→]
Efficient Two Stage Spectrum Sensing Combination for Cognitive Radio [Program→]
Orlowska-Kowalska, T.
Stability of a New Adaptive Full-order Observer with an Auxiliary Variable [Program→]
Otte, M.
Hardware-in-the-Loop Co-Simulation Based Validation of Power System Control Applications [Program→]
Ould-Abdeslam, D.
A novel non-isolated active charge balancing architecture for lithium-ion batteries [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
P P, R.
Load Commutated SCR based Multilevel Current Source Inverter fed Induction Motor Drive [Program→]
Pak, M.
Functional Safety Improvement of Electric Power Steering System by using Electronic Stability Control System [Program→]
Pakonen, A.
Synthesis-aided reliability assurance of basic block models for model checking purposes [Program→]
Pan, H.
Robust consensus of fractional-order singular uncertain multi-agent system under undirected graph [Program→]
H∞ synchronization control for uncertain coronary artery systems with time-delay based on improved Jensen inequality [Program→]
Pan, L.
A Probability Distribution Based Cooperative Search Approach for Stochastic Source Localization [Program→]
Pang, G.
Dynamic properties analysis and motion planning for underactuated wheeled Acrobot [Program→]
Pang, X.
TPPMA: New Adaptive BP Neural Network Based on PSO and PCA Algorithms [Program→]
Parviz, F.
A TLBO Algorithm for Design Optimization of DVRs in an Interline DVR (IDVR) [Program→]
Patel, R.
An Optimal Distributed MPC scheme for Automatic Generation Control under Network Constraints [Program→]
Pellegrino, G.
A New Laboratory for Hands-on Teaching of Electrical Engineering [Program→]
Peng, C.
Predictive Control-Based Consensus of Networked Unmanned Surface Vehicle Formation Systems [Program→]
Peng, T.
CCR based Key Performance Indicator Monitoring Method for Industrial Processes [Program→]
Petersen, A.
An Experimental Investigation of MOSFET Intrisic Body Diode Performance [Program→]
Piatkowska, E.
Smart Grid Reference Architecture, an Approach on a Secure and Model-Driven Implementation [Program→]
Piekoszewski, J.
Electricity consumption data clustering for load profiling using generalized self-organizing neural networks with evolving splitting-merging structures [Program→]
Pinto, S.
TZ-VirtIO: enabling standardized inter-partition communication in a TrustZone-assisted hypervisor [Program→]
DIHyper: providing lifetime Hypervisor Data Integrity [Program→]
Pires, F.
Quo Vadis Industry 4.0: An overview Based on Scientific Publications Analytics [Program→]
Pizel, J.
On the road to Industry 4.0: a fieldbus architecture to acquire specific smart instrumentation data in existing industrial plant for predictive maintenance [Program→]
Plaipichit, S.
The property investigation of solder mixed with thermoelectrics AlZnO by using digital holography [Program→]
Pou, J.
Energy Balancing of the Alternate Arm Converter under Parameter Variations [Program→]
Prakobsang, T.
The property investigation of solder mixed with thermoelectrics AlZnO by using digital holography [Program→]
Preethichandra, D.
A Novel PLC Impedance Conditioning Technique for Quasi-Common Mode Power-Line Antenna Injection [Program→]
Pritchard, S.
Cryptography Methods for Software-Defined Wireless Sensor Networks [Program→]
Pu, J.
Safety Message Dissemination Using Edge Computing in Heterogeneous VANETs [Program→]
Puthal, D.
Introducing Network Multi-tenancy for Cloud-based Enterprise Resource Planning: An IoT Application [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Qi, A.
Predictive Control-Based Consensus of Networked Unmanned Surface Vehicle Formation Systems [Program→]
Qiao, Y.
Bone Scintigraphy Retrieval Using SIFT-based Fly Local Sensitive Hashing [Program→]
Qin, J.
Fault-Tolerant Cooperative Tracking Control of Nonlinear Affine Systems Using Integral Sliding Mode Control [Program→]
Qiu, J.
Dynamic properties analysis and motion planning for underactuated wheeled Acrobot [Program→]
Qiu, Q.
Cyber attack detection in platoon-based vehicular networked control systems [Program→]
Qiu, W.
Modeling and Stability Analysis of DFIG based D-Q Impedance under Weak Networks [Program→]
Qunhai, H.
The topology research of series-parallel multi-function composite controller for DC power distribution network [Program→]
Finite-set Model-Based Predictive Control of a Novel Alternate Arm Modular Multilevel Converter [Program→]
Qureshi, U.
Problem of Wireless Fingerprint Duplication in Fingerprinting based Indoor Localization [Program→]
Analysis of BLE based Indoor Localization System with Multiple Transmission Power Levels [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
R, K.
Fast Capacitor Balancing Scheme for Low Voltage Cascaded H-bridges in Multilevel Dodecagonal Space Vector Structure [Program→]
Raeber, M.
A novel non-isolated active charge balancing architecture for lithium-ion batteries [Program→]
Rahman, F.
Charging Control of Vanadium Redox Battery Based Energy Storage Systems with Variable Input Power [Program→]
Rath, M.
Low Power Ice Detection With Capacitive and Impedance Spectroscopy-based Measurements [Program→]
Rathmair, M.
LightClockV2 - A Motivation for Teaching Scalable Digital Hardware Design [Program→]
Rech, C.
A nk +/- m - Order Harmonic Repetitive Control Scheme with Improved Stability Characteristics [Program→]
Riedel, J.
Analytical Determination of the ZVS Boundaries for Resonant Dual Active Bridge Converters [Program→]
Rivera, M.
Open-Circuit Fault Diagnosis and Fault-Tolerant Model Predictive Control of SubMultilevel Inverter [Program→]
Rodrigues, J.
Introducing Network Multi-tenancy for Cloud-based Enterprise Resource Planning: An IoT Application [Program→]
Rohjans, S.
Hardware-in-the-Loop Co-Simulation Based Validation of Power System Control Applications [Program→]
Rojas, C.
Model Predictive Control of a Multi-String LCL-Type Grid-Connected H-NPC PV Converter [Program→]
Romero, G.
Case Study of Data Management for Power and Energy Monitoring [Program→]
Rudzinski, F.
Electricity consumption data clustering for load profiling using generalized self-organizing neural networks with evolving splitting-merging structures [Program→]
Rueda, L.
Case Study of Data Management for Power and Energy Monitoring [Program→]
Ryan, D.
A Buck Converter with Integrated Circuit Breaker [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Saeed, J.
An Integrated SRM Drive with Constant Current, Constant Voltage Charging Capability for Electric Vehicle Application [Program→]
Efficient Model Predictive Control of Full-Bridge DC-DC Converter using Laguerre Functions [Program→]
Model Predictive Control of an Electric Vehicle Motor Drive Integrated Battery Charger [Program→]
A Second-order Sliding Mode Voltage Oriented Control of Three-phase Active Front End Rectifier [Program→]
Sahoo, B.
Introducing Network Multi-tenancy for Cloud-based Enterprise Resource Planning: An IoT Application [Program→]
Sahoo, K.
Introducing Network Multi-tenancy for Cloud-based Enterprise Resource Planning: An IoT Application [Program→]
Sakuma, Y.
Building Thermal Performance Assessments Using Simple Sensors for the Green New Deal in Japan [Program→]
Santos, J.
Application of the two-stage one-dimensional cutting stock problem in the steel industry [Program→]
Santos, J.
Application of the two-stage one-dimensional cutting stock problem in the steel industry [Program→]
Sarnago, H.
An Inter-Disciplinary Approach to Teaching Biomedical Electronics with an Electroporation-Applied Example [Program→]
A Versatile Hardware Platform for Teaching Resonant Power Conversion Courses [Program→]
Model Predictive Control for Resonant Power Converters Applied to Induction Heating [Program→]
An Application of Learner-Centered Teaching of Advanced Electromagnetics for Electronic Engineering Master Students [Program→]
Sasaki, T.
Development of the Grip Dynamometer to Measure the Force of Each Finger [Program→]
Sato, D.
Active Structural Control with Suppression of Absolute Acceleration Using Equivalent-Input-Disturbance Approach [Program→]
Sato, N.
Development of the Grip Dynamometer to Measure the Force of Each Finger [Program→]
Sauter, T.
Challenges of in-situ thermal characterization of thin-film isolation layers for printed electronics [Program→]
Sauter, T.
Getting fit for the future: Optimizing energy usage in existing buildings by adding non-invasive sensor networks [Program→]
Sauter, T.
Using Smart Breakers for Demand Side Management in Smart Grids [Program→]
Smart Grid Reference Architecture, an Approach on a Secure and Model-Driven Implementation [Program→]
Sauter, T.
A Multi-Agent-Based Middleware for the Development of Complex Architectures [Program→]
Smart Grid Reference Architecture, an Approach on a Secure and Model-Driven Implementation [Program→]
Schalkhammer, T.
Challenges of in-situ thermal characterization of thin-film isolation layers for printed electronics [Program→]
Schlauf, M.
Challenges of in-situ thermal characterization of thin-film isolation layers for printed electronics [Program→]
Schotten, H.
Communication Abstraction Supports Network Resource Virtualisation in Automation [Program→]
Schweighofer, B.
A Digital Isolated High Voltage Probe for Measurements in Power Electronics [Program→]
Low Power Ice Detection With Capacitive and Impedance Spectroscopy-based Measurements [Program→]
Flywheel Energy Storage Systems Compared to Competing Technologies for Grid Load Mitigation in EV Fast-Charging Applications [Program→]
Seidl, C.
Getting fit for the future: Optimizing energy usage in existing buildings by adding non-invasive sensor networks [Program→]
Setiadi, H.
Low-Frequency Oscillatory Stability Study on 500 kV Java-Indonesian Electric Grid [Program→]
Comparison of Battery Energy Storage Models for Small Signal Stability in Power System [Program→]
Seyedalipour, S.
Lyapunov-Function-Based Control Approach for Three-Level Four-Leg Shunt Active Power Filters with Nonlinear and Unbalanced Loads [Program→]
Shafiq, S.
A Novel Operation Strategy of Battery-Supercapacitor Hybrid Energy Storage System Providing Frequency Regulation Service [Program→]
Shah, R.
Low-Frequency Oscillatory Stability Study on 500 kV Java-Indonesian Electric Grid [Program→]
Comparison of Battery Energy Storage Models for Small Signal Stability in Power System [Program→]
Shahbaz, A.
Probabilistic Change Detector with Human Verifier for Intelligent Sterile Zone Monitoring [Program→]
Shahnia, F.
Enhancing the Estimation of the Overall Produced Power by Several Adjacent Photovoltaic Systems Using Existing Correlational Factors [Program→]
Impact of the Capacity and Number of Inertial and Non-inertial Distributed Energy Resources within a Microgrid on its Stability Margins [Program→]
Sharma, V.
An LPV H∞ Control Design for the Varying Rotor Resistance Effects on the Dynamic Performance of Induction Motors [Program→]
She, J.
Dynamic properties analysis and motion planning for underactuated wheeled Acrobot [Program→]
Active Structural Control with Suppression of Absolute Acceleration Using Equivalent-Input-Disturbance Approach [Program→]
Evaluation of Lower-Limb Rehabilitation Based on Muscle Fatigue [Program→]
Shih, W.
Autonomous Mobile Robot Intrinsic Navigation Based on Visual Topological Map [Program→]
Shimada, N.
Inference of Grasping Pattern from Object Image Based on Interaction Descriptor [Program→]
Shin, S.
The Influence of Gesture during the Presentation on Intercultural Learners [Program→]
Shinshi, T.
Combination of oil film bearing and bearingless motor for high load capacity and stable rotation [Program→]
Shu, L.
A Mechanism for Continuous Object Boundary Region Detection and Prediction in hybrid WSN [Program→]
Sieni, E.
An Inter-Disciplinary Approach to Teaching Biomedical Electronics with an Electroporation-Applied Example [Program→]
Sikorski, A.
Comparative Analysis of Finite Control Set Model Predictive Control Methods for Grid-Connected AC-DC Converters with LCL Filter [Program→]
Silva, B.
WiFi based Indoor Positioning using Pattern Recognition [Program→]
Skyllas-Kazacos, M.
Charging Control of Vanadium Redox Battery Based Energy Storage Systems with Variable Input Power [Program→]
Smith, M.
An Experimental Analysis of the Effect of Cell Degradation on Dynamic Charge Acceptance in Lead-Acid Cells [Program→]
Soler Perez Olaya, S.
Communication Abstraction Supports Network Resource Virtualisation in Automation [Program→]
Song, J.
An Intelligent Multi-fault Diagnosis System for Hybrid Rocket Vehicles [Program→]
Song, Q.
A Decentralized Energy Management Strategy for a Battery/Supercapacitor Hybrid Energy Storage System in Autonomous DC Microgrid [Program→]
Spliethoff, H.
Monitoring Oxy-Coal Flame Stability [Program→]
Stegen, S.
A Hybrid Communication Platform for Multi-Microgrid Energy Management System Optimization [Program→]
Steiner, H.
Challenges of in-situ thermal characterization of thin-film isolation layers for printed electronics [Program→]
Steyn-Ross, A.
Linear AC voltage regulator: Implementation details of a multi-winding approach [Program→]
Stone, D.
An Experimental Analysis of the Effect of Cell Degradation on Dynamic Charge Acceptance in Lead-Acid Cells [Program→]
An Experimental Investigation of MOSFET Intrisic Body Diode Performance [Program→]
Strasser, T.
Hardware-in-the-Loop Co-Simulation Based Validation of Power System Control Applications [Program→]
Su, H.
Optimal tracking control of flight trajectory for unmanned aerial vehicles [Program→]
Damping Control for Systems with Sinusoidal Disturbances Based on Internal Model Principle [Program→]
Su, P.
TPPMA: New Adaptive BP Neural Network Based on PSO and PCA Algorithms [Program→]
Su, X.
Key Physical Techniques for Implementing URLLC [Program→]
Su, Y.
Instantaneous Current Distributing Control Collaborated with Voltage to Neutral Equalization for Grid-Tied Single-Phase Three-Wire Inverters [Program→]
Subiantoro, A.
Stability of The Rotor Flux Oriented Speed Sensorless Permanent Magnet Synchronous Motor Control [Program→]
Sudha Letha, S.
Hardware Implementation of Power Quality Improvement in Photo-voltaic Fed Cascaded H-bridge Multilevel Inverter [Program→]
Sui, X.
Image-distortion correction algorithm for computer-generated holographic display [Program→]
Sun, G.
Contouring Control of Linear Motor Direct-Drive X-Y Table via Chattering-Free Discrete-Time Sliding Mode Control [Program→]
Sun, J.
Modeling of DoS Attack and Defense in Networked Control Systems Using Game Theory [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Takahashi, D.
Extended Reproduction of Demonstration Motion Using Variational Autoencoder [Program→]
Tang, G.
Optimal tracking control of flight trajectory for unmanned aerial vehicles [Program→]
Damping Control for Systems with Sinusoidal Disturbances Based on Internal Model Principle [Program→]
TPPMA: New Adaptive BP Neural Network Based on PSO and PCA Algorithms [Program→]
Active control design for Networked Offshore Platforms [Program→]
Tang, T.
Current Control Strategy of Harmonic Current Injection System for Power Capacitor [Program→]
Tang, X.
Safety Message Dissemination Using Edge Computing in Heterogeneous VANETs [Program→]
Tang, Y.
An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging [Program→]
Tao, S.
Trajectory Tracking Controller Design for a Quadrotor Aircraft Based on Cascade Sliding Mode Control [Program→]
Tashakori, A.
MPC and Energy Storage Based Frequency Regulation Strategy for Hybrid Electric Ships [Program→]
Tavares, A.
TZ-VirtIO: enabling standardized inter-partition communication in a TrustZone-assisted hypervisor [Program→]
DIHyper: providing lifetime Hypervisor Data Integrity [Program→]
Tawadros, P.
Hardware-In-The-Loop Simulation For The Design And Testing Of Motor In Advanced Powertrain Applications [Program→]
Tawaki, Y.
Evaluation of Gait Phase Detection Methods for Walking Assist Robot [Program→]
Teixeira, C.
Autonomous Power Sharing Schemes for Series-Cascaded DC Microgrid [Program→]
Series-Cascaded AC Microgrid Topology Integrating Non-dispatchable Distributed Generation and Storage [Program→]
Analytical Determination of the ZVS Boundaries for Resonant Dual Active Bridge Converters [Program→]
Terada, H.
Development of the Grip Dynamometer to Measure the Force of Each Finger [Program→]
Thakur, T.
Hardware Implementation of Power Quality Improvement in Photo-voltaic Fed Cascaded H-bridge Multilevel Inverter [Program→]
Tiantian, Z.
Two-stage Aviation Rectifier based on cascaded H-Bridge [Program→]
Tiwary, M.
Introducing Network Multi-tenancy for Cloud-based Enterprise Resource Planning: An IoT Application [Program→]
Tongzhen, W.
The topology research of series-parallel multi-function composite controller for DC power distribution network [Program→]
Finite-set Model-Based Predictive Control of a Novel Alternate Arm Modular Multilevel Converter [Program→]
Torresan, H.
A Buck Converter with Integrated Circuit Breaker [Program→]
Toyoshima, A.
Autonomous Mobile Robot Navigation: Consideration of the Pedestrian’s Dynamic Personal Space [Program→]
Trabelsi, M.
Open-Circuit Fault Diagnosis and Fault-Tolerant Model Predictive Control of SubMultilevel Inverter [Program→]
Low Complexity Model Predictive Control of PUC5 based Dynamic Voltage Restorer [Program→]
Treytl, A.
Getting fit for the future: Optimizing energy usage in existing buildings by adding non-invasive sensor networks [Program→]
Tsang, K.
A Humans’ Status Detection Scheme for Industrial Safety [Program→]
Tsang, P.
Digital Holographic System for Automotive Augmented Reality Head-Up-Display [Program→]
Tsang, Y.
A Humans’ Status Detection Scheme for Industrial Safety [Program→]
Tsunoda, W.
Combination of oil film bearing and bearingless motor for high load capacity and stable rotation [Program→]
Tu, Y.
Predictive Model-Based Speed Controller and Model-Free Current Controller in a Fault-Tolerant PMSM Drive [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Uchimura, Y.
Network-based control with state prediction \\for time-delayed system [Program→]
Ullah Nutkani, I.
A New Modular Asymmetrical Half-Bridge Switched Reluctance Motor Integrated Drive for Electric Vehicle Application [Program→]
Umair, Z.
Problem of Wireless Fingerprint Duplication in Fingerprinting based Indoor Localization [Program→]
Analysis of BLE based Indoor Localization System with Multiple Transmission Power Levels [Program→]
Umetani, K.
Theoretical Derivation of Phase Current Profile for Switched Reluctance Motors to Suppress Radial Force Ripple and Torque Ripple [Program→]
Review of Current Balance Mechanism in Multiphase LLC Resonant Converters [Program→]
Urrutia, M.
Predictive Control Strategy for an Induction Machine fed by a 3L-NPC Converter with Fixed Switching Frequency and Improved Tracking Error [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Vahedi, H.
Low Complexity Model Predictive Control of PUC5 based Dynamic Voltage Restorer [Program→]
Valliappan, P.
Monitoring Oxy-Coal Flame Stability [Program→]
Vilathgamuwa, M.
MPC and Energy Storage Based Frequency Regulation Strategy for Hybrid Electric Ships [Program→]
Vlacic, L.
Cyber attack detection in platoon-based vehicular networked control systems [Program→]
Vyatkin, V.
Synthesis-aided reliability assurance of basic block models for model checking purposes [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Walewski, J.
Communication Abstraction Supports Network Resource Virtualisation in Automation [Program→]
Walker, P.
Hardware-In-The-Loop Simulation For The Design And Testing Of Motor In Advanced Powertrain Applications [Program→]
Wang, B.
Highly sensing characteristics of gold nanorings based on DDA analysis [Program→]
Wang, C.
A Novel Integrated Identification Method of Model Structure and Parameters for Drive System [Program→]
Wang, D.
Fault Diagnosis of Linear Discrete Time-Varying System with Multiplicative Noise Based on Parity Space Method [Program→]
Wang, D.
Evaluation of Lower-Limb Rehabilitation Based on Muscle Fatigue [Program→]
Wang, G.
A Novel Demodulation Method Based High-Frequency Signal Injection for Sensorless SPMSM Control Considering Cross-Saturation Effect [Program→]
Wang, H.
Experimental Analysis of Networked Visual Servo Inverted Pendulum System with Noise Attack [Program→]
Wang, J.
Stabilization of linear systems by sampled-data feedback control subject to Markovian jumping [Program→]
Wang, J.
A Probability Distribution Based Cooperative Search Approach for Stochastic Source Localization [Program→]
Wang, J.
Jacobian Estimation with Adaptive Kalman Filter for Uncalibrated Visual Servo Using Homography [Program→]
Wang, J.
A Probability Distribution Based Cooperative Search Approach for Stochastic Source Localization [Program→]
Wang, L.
Design of PM2.5 Monitoring System under the Human Micro-environment [Program→]
Wang, L.
EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes [Program→]
Wang, L.
An Integrated SRM Drive with Constant Current, Constant Voltage Charging Capability for Electric Vehicle Application [Program→]
Efficient Model Predictive Control of Full-Bridge DC-DC Converter using Laguerre Functions [Program→]
Model Predictive Control of an Electric Vehicle Motor Drive Integrated Battery Charger [Program→]
An Optimal Distributed MPC scheme for Automatic Generation Control under Network Constraints [Program→]
A Second-order Sliding Mode Voltage Oriented Control of Three-phase Active Front End Rectifier [Program→]
Wang, P.
Dual Phase Shift PWM-CSCs Based Hybrid HVDC Transmission System [Program→]
Wang, T.
Adaptive Fuzzy Pseudo Inverse Output-Feedback Control for a Class of Asymmetric Hysteresis Nonlinear System [Program→]
Wang, W.
An Improved Y-Source Inverter with Continuous Input Current [Program→]
Wang, W.
Digital Holographic System for Automotive Augmented Reality Head-Up-Display [Program→]
Wang, X.
POF-CAN-Based Distributed System for Thermal Expansion Monitoring [Program→]
Wang, Y.
Robust Nonlinear Adaptive Backstepping Coordinated Control for Boiler-Turbine Units [Program→]
Wang, Y.
Predictive Control-Based Consensus of Networked Unmanned Surface Vehicle Formation Systems [Program→]
Wang, Z.
Fault Diagnosis of Linear Discrete Time-Varying System with Multiplicative Noise Based on Parity Space Method [Program→]
Wasonga, F.
Efficient Two Stage Spectrum Sensing Combination for Cognitive Radio [Program→]
Wegleiter, H.
A Digital Isolated High Voltage Probe for Measurements in Power Electronics [Program→]
Low Power Ice Detection With Capacitive and Impedance Spectroscopy-based Measurements [Program→]
Flywheel Energy Storage Systems Compared to Competing Technologies for Grid Load Mitigation in EV Fast-Charging Applications [Program→]
Wei, J.
Exploring the Application of Artificial Neural Network in Rural Streamflow Prediction - A Feasibility Study [Program→]
Wei, T.
A New Coordinated Operation Strategy for Unified Power Quality Conditioner (UPQC) [Program→]
Wen, C.
Modelling Spatial Correlations by Using Deep CNN and LSTM for Texture Image Classification [Program→]
Wen, G.
H∞ synchronization control for uncertain coronary artery systems with time-delay based on improved Jensen inequality [Program→]
Wen, G.
Robust consensus of fractional-order singular uncertain multi-agent system under undirected graph [Program→]
Wendt, A.
A Multi-Agent-Based Middleware for the Development of Complex Architectures [Program→]
Wenig, F.
Getting fit for the future: Optimizing energy usage in existing buildings by adding non-invasive sensor networks [Program→]
Wenjing, D.
Two-stage Aviation Rectifier based on cascaded H-Bridge [Program→]
Wickramasinghe, H.
Energy Balancing of the Alternate Arm Converter under Parameter Variations [Program→]
Wijesooriya, P.
Linear AC voltage regulator: Implementation details of a multi-winding approach [Program→]
Wilcox, S.
Monitoring Oxy-Coal Flame Stability [Program→]
Wilker, S.
A Multi-Agent-Based Middleware for the Development of Complex Architectures [Program→]
Using Smart Breakers for Demand Side Management in Smart Grids [Program→]
Smart Grid Reference Architecture, an Approach on a Secure and Model-Driven Implementation [Program→]
Wilkinson, R.
Analytical Determination of the ZVS Boundaries for Resonant Dual Active Bridge Converters [Program→]
Wollschlaeger, M.
Communication Abstraction Supports Network Resource Virtualisation in Automation [Program→]
Wu, C.
Symbiotic Controller Design Using a Memory-Based FSM Model [Program→]
Wu, H.
A Novel Integrated Identification Method of Model Structure and Parameters for Drive System [Program→]
Wu, M.
An Advanced Gas Metal Arc Welding Machine Design for Low Spatter Welding [Program→]
Wu, M.
Evaluation of Lower-Limb Rehabilitation Based on Muscle Fatigue [Program→]
Wu, Y.
Fault Diagnosis of Linear Discrete Time-Varying System with Multiplicative Noise Based on Parity Space Method [Program→]
Wu, Z.
Distributed reactive power optimization in distribution systems based on system partitioning [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Xi, Y.
Robust Nonlinear Adaptive Backstepping Coordinated Control for Boiler-Turbine Units [Program→]
Xia, B.
Dual Phase Shift PWM-CSCs Based Hybrid HVDC Transmission System [Program→]
Xia, D.
Impedance Modeling and Stability Analysis of Three-phase Inverter with an LCL Filter [Program→]
Xiang, J.
Controllability Analysis of a Quadrotor-like Autonomous Underwater Vehicle [Program→]
Xiao, C.
Key Physical Techniques for Implementing URLLC [Program→]
Xiao, W.
Optimal Analysis and Design of DC-DC Converter to Achieve High Voltage Conversion Gain and High Efficiency for Renewable Energy Systems [Program→]
Feasibility Study on Using Electrical Home Appliances for Distributed Reactive Power Support [Program→]
Xie, H.
Comparison of Two Performance Optimization Approaches for Data-driven Design of Fault-Tolerant Control Systems [Program→]
Xie, X.
A Probability Distribution Based Cooperative Search Approach for Stochastic Source Localization [Program→]
Xie, Y.
CCR based Key Performance Indicator Monitoring Method for Industrial Processes [Program→]
Xin, C.
Two-stage Aviation Rectifier based on cascaded H-Bridge [Program→]
Xinxing, L.
Off-Policy Q-Learning for Infinite Horizon LQR Problem with Unknown Dynamics [Program→]
Xu, D.
An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging [Program→]
Xu, D.
A Novel Integrated Identification Method of Model Structure and Parameters for Drive System [Program→]
Modeling and Stability Analysis of DFIG based D-Q Impedance under Weak Networks [Program→]
Impedance Modeling and Stability Analysis of Three-phase Inverter with an LCL Filter [Program→]
A Novel Demodulation Method Based High-Frequency Signal Injection for Sensorless SPMSM Control Considering Cross-Saturation Effect [Program→]
Xu, G.
Research on High Power Stacked Boost Converters for Aerostat [Program→]
Xu, K.
Bone Scintigraphy Retrieval Using SIFT-based Fly Local Sensitive Hashing [Program→]
Xu, N.
A Novel Hybrid ZCS ZVS Current Control Method For Micro-inverters [Program→]
Xue, W.
Trajectory Tracking Controller Design for a Quadrotor Aircraft Based on Cascade Sliding Mode Control [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Yadav, A.
Fast Capacitor Balancing Scheme for Low Voltage Cascaded H-bridges in Multilevel Dodecagonal Space Vector Structure [Program→]
Yamada, S.
Proposal of State-Dependent Minimum Variance Estimation of Load-Side External Torque Considering Modeling and Measurement Errors [Program→]
Yamamoto, M.
Review of Current Balance Mechanism in Multiphase LLC Resonant Converters [Program→]
Yamamoto, T.
Design of a Two-Inertia Control System using a Fictitious Exogenous Signal [Program→]
Yang, C.
Dynamic properties analysis and motion planning for underactuated wheeled Acrobot [Program→]
Yang, C.
CCR based Key Performance Indicator Monitoring Method for Industrial Processes [Program→]
Yang, E.
An Intelligent Multi-fault Diagnosis System for Hybrid Rocket Vehicles [Program→]
Yang, F.
Cyber attack detection in platoon-based vehicular networked control systems [Program→]
Yang, J.
Bone Scintigraphy Retrieval Using SIFT-based Fly Local Sensitive Hashing [Program→]
Yang, M.
A Novel Integrated Identification Method of Model Structure and Parameters for Drive System [Program→]
Yang, M.
Modelling Spatial Correlations by Using Deep CNN and LSTM for Texture Image Classification [Program→]
Yang, X.
Comparison of Two Performance Optimization Approaches for Data-driven Design of Fault-Tolerant Control Systems [Program→]
Yang, X.
Predictive Control-Based Consensus of Networked Unmanned Surface Vehicle Formation Systems [Program→]
Trajectory Tracking Controller Design for a Quadrotor Aircraft Based on Cascade Sliding Mode Control [Program→]
Yang, Y.
Efficient Global Network Resource Pre-allocation in SDN based Cloud Centers [Program→]
Yang, Y.
High-speed color sorting algorithm based on FPGA implementation [Program→]
Modelling Spatial Correlations by Using Deep CNN and LSTM for Texture Image Classification [Program→]
Yang, Z.
Prescribed Performance Control for Consensus Output Tracking of Nonlinear Systems [Program→]
Yao, G.
Current Control Strategy of Harmonic Current Injection System for Power Capacitor [Program→]
Yaoxin, D.
Analysis of BLE based Indoor Localization System with Multiple Transmission Power Levels [Program→]
Yi, X.
A Mechanism for Continuous Object Boundary Region Detection and Prediction in hybrid WSN [Program→]
Yin, J.
A New Coordinated Operation Strategy for Unified Power Quality Conditioner (UPQC) [Program→]
Yin, S.
A Data-Driven Process Monitoring Approach for Dynamic Processes with Deterministic Disturbance [Program→]
Yin, Z.
Depth Estimation From Light Field Images Via Deep Fusion Network [Program→]
Ymaguchi, T.
Design of a Two-Inertia Control System using a Fictitious Exogenous Signal [Program→]
Yokokura, Y.
Identification of Internal Impedance Parameters of Multi-Inertial Environment For Haptic Rendering [Program→]
Yokota, S.
Autonomous Mobile Robot Navigation: Consideration of the Pedestrian’s Dynamic Personal Space [Program→]
Yong Kwen Chong, J.
A Buck Converter with Integrated Circuit Breaker [Program→]
Young, H.
Finite-Control-Set Predictive Voltage Control of Paralleled Inverters in an Islanded Microgrid [Program→]
Yu, T.
A Humans’ Status Detection Scheme for Industrial Safety [Program→]
Yu, X.
Reaching Law Based Sliding Mode Control For Discrete Time System with Uncertainty [Program→]
Robust consensus of fractional-order singular uncertain multi-agent system under undirected graph [Program→]
An Optimal Distributed MPC scheme for Automatic Generation Control under Network Constraints [Program→]
A Second-order Sliding Mode Voltage Oriented Control of Three-phase Active Front End Rectifier [Program→]
Robust Nonlinear Adaptive Backstepping Coordinated Control for Boiler-Turbine Units [Program→]
Yu, Z.
Contouring Control of Linear Motor Direct-Drive X-Y Table via Chattering-Free Discrete-Time Sliding Mode Control [Program→]
Yusivar, F.
Stability of The Rotor Flux Oriented Speed Sensorless Permanent Magnet Synchronous Motor Control [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Zahang, N.
Hardware-In-The-Loop Simulation For The Design And Testing Of Motor In Advanced Powertrain Applications [Program→]
Zeng, J.
Key Physical Techniques for Implementing URLLC [Program→]
Zeng, Y.
High-speed color sorting algorithm based on FPGA implementation [Program→]
Zhan, G.
Experimental Analysis of Networked Visual Servo Inverted Pendulum System with Noise Attack [Program→]
Zhang, A.
Dynamic properties analysis and motion planning for underactuated wheeled Acrobot [Program→]
Zhang, B.
Active control design for Networked Offshore Platforms [Program→]
Controller Design for Takagi-Sugeno Fuzzy Systems with Nonlinear Consequent Part via Sampled-Data Measurements [Program→]
Zhang, D.
A Novel Hybrid ZCS ZVS Current Control Method For Micro-inverters [Program→]
Zhang, G.
An Improved ORB Algorithm Based on Multi-feature Fusion [Program→]
Zhang, G.
A Novel Demodulation Method Based High-Frequency Signal Injection for Sensorless SPMSM Control Considering Cross-Saturation Effect [Program→]
Zhang, J.
Modelling Spatial Correlations by Using Deep CNN and LSTM for Texture Image Classification [Program→]
Zhang, Q.
Reaching Law Based Sliding Mode Control For Discrete Time System with Uncertainty [Program→]
Zhang, X.
Dynamic properties analysis and motion planning for underactuated wheeled Acrobot [Program→]
Zhang, X.
Active control design for Networked Offshore Platforms [Program→]
Controller Design for Takagi-Sugeno Fuzzy Systems with Nonlinear Consequent Part via Sampled-Data Measurements [Program→]
Zhang, X.
Adaptive Fuzzy Pseudo Inverse Output-Feedback Control for a Class of Asymmetric Hysteresis Nonlinear System [Program→]
Zhang, X.
Charging Control of Vanadium Redox Battery Based Energy Storage Systems with Variable Input Power [Program→]
Zhang, X.
Modeling and Stability Analysis of DFIG based D-Q Impedance under Weak Networks [Program→]
Impedance Modeling and Stability Analysis of Three-phase Inverter with an LCL Filter [Program→]
Zhang, Y.
Comparison of Two Performance Optimization Approaches for Data-driven Design of Fault-Tolerant Control Systems [Program→]
Zhang, Y.
A Mechanism for Continuous Object Boundary Region Detection and Prediction in hybrid WSN [Program→]
Zhang, Z.
EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes [Program→]
Zhang, Z.
Jacobian Estimation with Adaptive Kalman Filter for Uncalibrated Visual Servo Using Homography [Program→]
Zhang, Z.
An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging [Program→]
Zhao, J.
Evaluation of Lower-Limb Rehabilitation Based on Muscle Fatigue [Program→]
Zhao, Y.
The accurate modeling and stability analysis for flyback converter based on describing function method [Program→]
Zhao, Y.
Design of PM2.5 Monitoring System under the Human Micro-environment [Program→]
Zhao, Z.
An Overview of Cyber Security for Smart Grid [Program→]
Zhao, Z.
H∞ synchronization control for uncertain coronary artery systems with time-delay based on improved Jensen inequality [Program→]
Zheng, K.
Depth Estimation From Light Field Images Via Deep Fusion Network [Program→]
Zheng, T.
The accurate modeling and stability analysis for flyback converter based on describing function method [Program→]
Zheng, W.
Fault-Tolerant Cooperative Tracking Control of Nonlinear Affine Systems Using Integral Sliding Mode Control [Program→]
Zheng, W.
Highly sensing characteristics of gold nanorings based on DDA analysis [Program→]
Zheng, Z.
An Intelligent Multi-fault Diagnosis System for Hybrid Rocket Vehicles [Program→]
Zhihong, P.
Off-Policy Q-Learning for Infinite Horizon LQR Problem with Unknown Dynamics [Program→]
Zhong, C.
Adaptive Fuzzy Pseudo Inverse Output-Feedback Control for a Class of Asymmetric Hysteresis Nonlinear System [Program→]
Zhou, J.
An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging [Program→]
Zhou, Z.
An Improved Y-Source Inverter with Continuous Input Current [Program→]
Zhou, Z.
A Mechanism for Continuous Object Boundary Region Detection and Prediction in hybrid WSN [Program→]
Zhu, G.
Adaptive Fuzzy Pseudo Inverse Output-Feedback Control for a Class of Asymmetric Hysteresis Nonlinear System [Program→]
Zhu, H.
A Humans’ Status Detection Scheme for Industrial Safety [Program→]
Zhu, J.
State-Space Modeling and Stability Analysis for Micro-grid considering Distributed Secondary Control [Program→]
Zhu, J.
Highly sensing characteristics of gold nanorings based on DDA analysis [Program→]
Zhu, X.
Digital Holographic System for Automotive Augmented Reality Head-Up-Display [Program→]
Zimann, F.
Design of Repetitive Controllers Through Sensitivity Function [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]